B+P PRO DEALS - Buster + Punch

KITCHEN FAUCET / PULL-OUT MIXER / LINEAR / GUN METAL

calina — Tue, 21 Jun 2022 11:40:26 +0000

A single lever kitchen tap with pull-out mixer that mixes water from the hot and cold pipes in your kitchen. This tap has been cast, sand-blasted and machined from solid metal in Italy. It features our signature linear-knurl pattern and is refined by hand. Available in four metal finishes: steel, brass, gun metal and welders black.

• Maximum thickness of mounting surface 40mm, with supplied fixings.

• Minimum recommended water pressure: 7.25 PSI (0.5 BAR)

• Maximum recommended water pressure: 72 PSI (5 BAR)

• Recommended maximum hot water temperature: 70°C (158°F)

• Recommended temperature range: 5 – 60°C (41 – 140°F)

Note: exceeding these temperatures or water pressures can result in damage to the faucet. A pressure reducing valve may be required to be fitted in high water pressure situations.

All Buster + Punch mixer faucets conform to standard EN817. In some cases, local housing regulations may require mixer faucet to be of a higher minimum water pressure standard. In this instance we would recommend consulting with a certified plumber about installing a pressure regulator or similar device.

Mixer faucet are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

The post KITCHEN FAUCET / PULL-OUT MIXER / LINEAR / GUN METAL appeared first on Buster + Punch: US.

KITCHEN FAUCET / PULL-OUT MIXER / LINEAR / STEEL

calina — Tue, 21 Jun 2022 11:34:03 +0000

• Maximum thickness of mounting surface 40mm, with supplied fixings.

• Minimum recommended water pressure: 7.25 PSI (0.5 BAR)

• Maximum recommended water pressure: 72 PSI (5 BAR)

• Recommended maximum hot water temperature: 70°C (158°F)

• Recommended temperature range: 5 – 60°C (41 – 140°F)

Note: exceeding these temperatures or water pressures can result in damage to the faucet. A pressure reducing valve may be required to be fitted in high water pressure situations.

Mixer faucet are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

The post KITCHEN FAUCET / PULL-OUT MIXER / LINEAR / STEEL appeared first on Buster + Punch: US.

KITCHEN FAUCET / MIXER / LINEAR / GUN METAL

calina — Tue, 21 Jun 2022 11:28:49 +0000

A kitchen faucet with single lever mixer. This faucet has been cast, sand-blasted and machined from solid metal in Italy. It features our signature cross-knurl pattern and is refined by hand. Available in four metal finishes: steel, brass, gun metal and welders black.

A kitchen faucet mixer with a single lever action that mixes water from the hot and cold pipes in your kitchen.

• Maximum thickness of mounting surface 40mm, with supplied fixings

• Minimum recommended water pressure: 7.25 PSI (0.5 BAR)

• Maximum recommended water pressure: 72 PSI (5 BAR)

• Recommended maximum hot water temperature: 70°C (158°F)

• Recommended temperature range: 5 – 60°C (41 – 140°F)

Note: exceeding these temperatures or water pressures can result in damage to the faucet. A pressure reducing valve may be required to be fitted in high water pressure situations.

Mixer faucets are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

The post KITCHEN FAUCET / MIXER / LINEAR / GUN METAL appeared first on Buster + Punch: US.

KITCHEN FAUCET / PULL-OUT MIXER / CROSS / GUN METAL

calina — Mon, 20 Jun 2022 14:12:34 +0000

A kitchen faucet with single lever with pull-out mixer. This faucet has been cast, sand-blasted and machined from solid metal in Italy. It features our signature cross-knurl pattern and is refined by hand. Available in four metal finishes: steel, brass, gun metal and welders black.

A kitchen mixer faucet with pull out spray, with a single lever action that mixes water from the hot and cold pipes in your kitchen.

• Maximum thickness of mounting surface 40mm, with supplied fixings.

• Minimum recommended water pressure: 7.25 PSI (0.5 BAR)

• Maximum recommended water pressure: 72 PSI (5 BAR)

• Recommended maximum hot water temperature: 70°C (158°F)

• Recommended temperature range: 5 – 60°C (41 – 140°F)

Note: exceeding these temperatures or water pressures can result in damage to the faucet. A pressure reducing valve may be required to be fitted in high water pressure situations.

Mixer faucet are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

The post KITCHEN FAUCET / PULL-OUT MIXER / CROSS / GUN METAL appeared first on Buster + Punch: US.

KITCHEN FAUCET / MIXER / CROSS / GUN METAL

calina — Mon, 20 Jun 2022 13:15:39 +0000

A kitchen faucet mixer with a single lever action that mixes water from the hot and cold pipes in your kitchen.

• Maximum thickness of mounting surface 40mm, with supplied fixings

• Minimum recommended water pressure: 7.25 PSI (0.5 BAR)

• Maximum recommended water pressure: 72 PSI (5 BAR)

• Recommended maximum hot water temperature: 70°C (158°F)

• Recommended temperature range: 5 – 60°C (41 – 140°F)

Note: exceeding these temperatures or water pressures can result in damage to the faucet. A pressure reducing valve may be required to be fitted in high water pressure situations.

Mixer faucets are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

The post KITCHEN FAUCET / MIXER / CROSS / GUN METAL appeared first on Buster + Punch: US.

KITCHEN FAUCET / MIXER / CROSS / STEEL

calina — Mon, 20 Jun 2022 13:14:49 +0000

A kitchen faucet mixer with a single lever action that mixes water from the hot and cold pipes in your kitchen.

• Maximum thickness of mounting surface 40mm, with supplied fixings

• Minimum recommended water pressure: 7.25 PSI (0.5 BAR)

• Maximum recommended water pressure: 72 PSI (5 BAR)

• Recommended maximum hot water temperature: 70°C (158°F)

• Recommended temperature range: 5 – 60°C (41 – 140°F)

Note: exceeding these temperatures or water pressures can result in damage to the faucet. A pressure reducing valve may be required to be fitted in high water pressure situations.

Mixer faucets are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

The post KITCHEN FAUCET / MIXER / CROSS / STEEL appeared first on Buster + Punch: US.

PULL BAR / CAST / BRASS

calina — Tue, 29 Mar 2022 13:32:40 +0000

A pull bar made from solid metal, with a durable brass EPL finish, and refined by hand. This pull bar features our signature rough-cast knuckle, hand polished solid metal bar and a debossed B+P insignia on the knuckle.

They work great on cabinet doors, cupboards and kitchen units.

Please note, due to the durable EPL wet-rating treatment, our CAST brass differs slightly in appearance from our CROSS + LINEAR brass finishes.

The post PULL BAR / CAST / BRASS appeared first on Buster + Punch: US.

CLOSET BAR / CAST / BRASS

calina — Tue, 29 Mar 2022 11:09:31 +0000

A closet bar made from solid metal with a durable brass EPL finish, refined by hand. It features our signature rough-cast knuckle and hand polished solid metal bar, with a debased B+P insignia.

They work great on closet doors, wardrobes, kitchen units and long drawers.

Please note, due to the durable EPL wet-rating treatment, our CAST brass differs slightly in appearance from our CROSS + LINEAR brass finishes.

The post CLOSET BAR / CAST / BRASS appeared first on Buster + Punch: US.

SKULL DOOR STOP / TRAVIS BARKER / BRASS

calina — Tue, 15 Feb 2022 12:55:17 +0000

A freestanding door stop made from solid cast metal with a brass EPL finish, polished and refined by hand. It's finished with debossed B+P & TB insignias and comes in a black silk bag and gift box. Thanks to the nature of the casting process, no two pieces are alike.

A Travis Barker Collaboration Product

The post SKULL DOOR STOP / TRAVIS BARKER / BRASS appeared first on Buster + Punch: US.

SKULL DRUM KEY / TRAVIS BARKER / STEEL

calina — Mon, 14 Feb 2022 16:50:45 +0000

A drum key designed by Travis Barker. It's made from solid cast stainless steel, polished and refined by hand. The drum key is stamped on the reverse with debossed B+P & TB insignias and comes complete with a matching ball chain so that it can be worn as a necklace as well. It comes in a black silk bag and gift box. Thanks to the casting process, each piece is one-of-a-kind.

A Travis Barker Collaboration Product

The post SKULL DRUM KEY / TRAVIS BARKER / STEEL appeared first on Buster + Punch: US.