Dimmer Switches | Metal Dimmer Switch | Buster + Punch https://www.busterandpunch.com/us/product-category/electricity/dimmer-switches/ Tue, 05 Mar 2024 11:48:45 +0000 en-US hourly 1 4G DIMMER / LED / WHITE https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/4g-dimmer-white-logo/ Tue, 06 Feb 2024 15:59:43 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216938 A dimmer switch finished in white. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid metal in white. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 4G DIMMER / LED / WHITE appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 4G DIMMER / LED / WHITE appeared first on Buster + Punch: US.

]]> 4G DIMMER / LED / STEEL https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/4g-dimmer-switch-steel/ Tue, 06 Feb 2024 15:59:39 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216937 A dimmer switch finished in steel. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid stainless steel. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 4G DIMMER / LED / STEEL appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 4G DIMMER / LED / STEEL appeared first on Buster + Punch: US.

]]> 4G DIMMER / LED / SMOKED BRONZE https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/4g-dimmer-switch-smoked-bronze/ Tue, 06 Feb 2024 15:59:37 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216935 A dimmer switch finished in smoked bronze. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid smoked bronze. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 4G DIMMER / LED / SMOKED BRONZE appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 4G DIMMER / LED / SMOKED BRONZE appeared first on Buster + Punch: US.

]]> 4G DIMMER / LED / BRASS https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/4g-dimmer-switch-brass/ Tue, 06 Feb 2024 15:59:36 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216934 A dimmer switch finished in brass. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid brass. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 4G DIMMER / LED / BRASS appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 4G DIMMER / LED / BRASS appeared first on Buster + Punch: US.

]]> 4G DIMMER / LED / BLACK https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/4g-dimmer-switch-black/ Tue, 06 Feb 2024 15:59:34 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216931 A dimmer switch finished in black. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid metal in black. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 4G DIMMER / LED / BLACK appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 4G DIMMER / LED / BLACK appeared first on Buster + Punch: US.

]]> 3G DIMMER / LED / WHITE https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/3g-dimmer-switch-white/ Tue, 06 Feb 2024 15:06:07 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216892 A dimmer switch finished in white. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid metal in white. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 3G DIMMER / LED / WHITE appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 3G DIMMER / LED / WHITE appeared first on Buster + Punch: US.

]]> 3G DIMMER / LED / STEEL https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/3g-dimmer-switch-steel/ Tue, 06 Feb 2024 15:06:03 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216889 A dimmer switch finished in steel. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid stainless steel. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 3G DIMMER / LED / STEEL appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 3G DIMMER / LED / STEEL appeared first on Buster + Punch: US.

]]> 3G DIMMER / LED / SMOKED BRONZE https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/3g-dimmer-switch-smoked-bronze/ Tue, 06 Feb 2024 15:06:01 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216886 A dimmer switch finished in smoked bronze. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid smoked bronze. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 3G DIMMER / LED / SMOKED BRONZE appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 3G DIMMER / LED / SMOKED BRONZE appeared first on Buster + Punch: US.

]]> 3G DIMMER / LED / BLACK https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/3g-dimmer-switch-black/ Tue, 06 Feb 2024 15:05:58 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216880 A dimmer switch finished in black. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid metal in black. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 3G DIMMER / LED / BLACK appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 3G DIMMER / LED / BLACK appeared first on Buster + Punch: US.

]]> 3G DIMMER / LED / BRASS https://www.busterandpunch.com/us/shop/electricity/dimmer-switches/3g-dimmer-switch-brass/ Tue, 06 Feb 2024 15:05:58 +0000 https://www.busterandpunch.com/us/?post_type=product&p=216883 A dimmer switch finished in brass. The dimmer knob features our signature, diamond-cut, cross knurl pattern and is made from solid brass. The dimmer comes with an LED dimmer module featuring next-generation technology developed specifically for dimmable LED bulbs, low-voltage and LED drivers. The module works exclusively with the Buster + Punch US range of wall plates, dimmer knobs and detail kits. It operates with a push ON/OFF rotary dimmer action for pinpoint dimming accuracy and can be used with single-pole or 3-way circuits.

FYI: This piece has a 1/8 inch shadow gap when installed. The backplate is available with a subtle etched ‘Buster + Punch’ logo, or without.

  • Intelligent load matching for enhanced compatibility
  • Maximum load: 250W for LED, 300W for halogen/incandescent
  • Designed for standard wiring
  • Contact us for details on controlling from more than two locations
  • Not compatible with 0-10V or retractive switches
read more

The post 3G DIMMER / LED / BRASS appeared first on Buster + Punch: US.

]]>

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources.

This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans.

Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations, contact us for details.

The post 3G DIMMER / LED / BRASS appeared first on Buster + Punch: US.

]]>